(1) Mohagheghian I, Charalambides M., Wang Y, Jiang L, Zhang X, Yan Y, Kinloch AJ, Dear JP, 2018. Effect of the polymer interlayer on the high-velocity soft impact response of laminated glass plates, International Journal of Impact Engineering, 120. pp. 150-170. https://doi.org/10.1016/j.ijimpeng.2018.06.002

(2) Zhang X, Mohammed IK, Zheng M, Wu N, Mohagheghian I, Zhang G, Yan Y, Dear JP, 2018. Temperature effects on the low velocity impact response of laminated glass with different types of interlayer materials, International Journal of Impact Engineering, 124:9-22. https://doi.org/10.1016/j.ijimpeng.2018.09.004

(3) Kaboglu C, Yu L, Mohagheghian I, Blackma, BRK, Kinloch AJ, Dear JP, 2018. Effects of the core density on the quasi-static flexural and ballistic performance of fibre-composite skin/foam-core sandwich structures, Journal of Materials Science, 53:16393-16414. https://doi.org/10.1007/s10853-018-2799-x

(4) Li X, Jiang L, Wang Y, Mohagheghian I, Dear JP, Li L, Yan Y, 2018. New insights into nanoindentation crack initiation in ion-exchanged sodium aluminosilicate glass, Journal of the American Ceramic Society, 101(7), 2930-2940. https://doi.org/10.1111/jace.15465

(5) Li X, Jiang L, Li J, Mohagheghian I, Dear JP, Li L, Yan Y, 2018. Li, X., Jiang, L., Li, J., Mohagheghian, I., Dear, J.P.   Li. L. and Yan, Y.  Elastic-plastic deformation in ion-exchanged aluminosilicate glass by loading rate dependent nanoindentation, Journal of Non-Crystalline Solids, 491:79-98. https://doi.org/10.1016/j.jnoncrysol.2018.04.003

(6) Li M, Coakley JA, Isheim D, Tian G, Shollock BA, 2018. Influence of the initial cooling rate from γ′ supersolvus temperatures on microstructure and phase compositions in a nickel superalloy, Journal of Alloys and Compounds, 732:765-776. https://doi.org/10.1016/j.jallcom.2017.10.263

(7) Li M, Pham MS, Peng Z, Tian G, Shollock BA, 2018. Creep deformation mechanisms and CPFE modelling of a nickel-base superalloy, Material Science and Engineering A, 718C:147-156. https://doi.org/10.1016/j.msea.2018.01.100.

(8) Chavoshi SZ, Jiang J, Wang Y, Fang S, Wang S, Shi Z, Lin J, 2018. Density-based constitutive modelling of P/M FGH96 for powder forging, International Journal of Mechanical Sciences, 138-139:110-121. https://doi.org/10.1016/j.ijmecsci.2018.02.003 http://hdl.handle.net/10044/1/57283

(9) Chen B, Jiang J, Dunne FPE, 2018. Is stored energy density the primary meso-scale mechanistic driver for fatigue crack nucleation?, International Journal of Plasticity, 101:213-229. https://doi.org/10.1016/j.ijplas.2017.11.005 http://hdl.handle.net/10044/1/54370

(10) Kaboglu C, Mohagheghian I, Zhou J, Guan Z, Cantwell W, John S, Blackman BRK, Kinloch AJ, Dear JP, 2018. High-velocity impact deformation and perforation of fibre-metal laminates, Journal of Materials Science, 53:4209–4228. https://dx.doi.org/10.1007/s10853-017-1871-2


(1) Chen B, Jiang J, Dunne FPE, 2017. Microstructurally-sensitive fatigue crack nucleation in Ni-based single and oligo crystals, Journal of Mechanics and Physics of Solids, https://doi.org/10.1016/j.jmps.2017.05.012

(2) Zhao Y, Patel Y, Hunt IA, Kareh KM, Holland AA, Korte C, Dear JP, Yue Y, Offer GJ, 2017. Preventing lithium ion battery failure during high temperatures by externally applied compression, Journal of Energy Storage, 13: 296-303. https://dx.doi.org/10.1016/j.est.2017.08.001

(3) Li X, Jiang L, Wang Y, Mohagheghian I, Dear JP, Li L, Yan Y, 2017. Correlation between K+-Na+ diffusion coefficient and flexural strength of chemically tempered aluminosilicate glass, Journal of Non-Crystalline Solids, 471, 72-81. https://doi.org/10.1016/j.jnoncrysol.2017.05.011

(4) Wang XF, Zou JW, Davies CM, Yang J, Tian GF, Ji CB, Feng YF, 2017. Microstructure Characterization of Inertial Friction Welding Zone for Nickel-Based Superalloy FGH96, Materials Science Forum, 898: 1110-1116. http://dx.doi.org/10.4028/www.scientific.net/MSF.898.1110

(5) Jiang J, Dunne FPE, and Britton TB, 2017. Towards Predictive Understanding of Fatigue Crack Nucleation in Ni-based Superalloys, JOM. http://dx.doi.org/10.1007/s11837-017-2307-9

(6) Zhang X, Zhao Y, Patel Y, Zhang T, Liu W, Chen M, Offer GJ, Yan Y, 2017. Potentiometric measurement of entropy change for lithium batteries, Physical Chemistry Chemical Physics. http://dx.doi.org/10.1039/C6CP08505A

(7) Jiang L, Wang Y, Mohagheghian I, Li X, Guo X, Li L, Dear JP, Yan Y, 2017. Subcritical crack growth and lifetime prediction of chemically strengthened aluminosilicate glass, Materials & Design, 122:128-135. http://dx.doi.org/10.1016/j.matdes.2017.03.020

(8) Mohagheghian I, Wang Y, Zhou J, Yu L, Guo X, Yan Y, Charalambides MN, Dear JP, 2017. Deformation and damage mechanisms of laminated glass windows subjected to high velocity soft impact, International Journal of Solids and Structures, 109: 46-62. http://dx.doi.org/10.1016/j.ijsolstr.2017.01.006 http://hdl.handle.net/10044/1/43785

(9) Mohagheghian I, Wang Y, Jiang L, Zhang X, Guo X, Yan Y, Kinloch AJ, Dear JP, 2017. Quasi-static and low velocity impact performance of monolithic and laminated glass windows employing chemically strengthened glass, European Journal of Mechanics A/Solids, 63:165-186. http://dx.doi.org/10.1016/j.euromechsol.2017.01.006 http://hdl.handle.net/10044/1/43981

(10) Jiang L, Wang Y, Mohagheghian I, Li X, Guo X, Li L, Dear JP, Yan Y, 2017. Effect of residual stress on the fracture of chemically strengthened thin aluminosilicate glass, Journal of Materials Science, 52: 1405-1415. http://dx.doi.org/10.1007/s10853-016-0434-2 http://hdl.handle.net/10044/1/41114

(11) Mohagheghian I, Yu L, Kaboglu, Dear JP, 2017. Impact and mechanical evaluation of composite sandwich structures. Comprehensive Composite Materials II, Chapter 8. Johnson, A. Soutis, C eds, Elsevier, Amsterdam, The Netherlands. (In press).

(12) Wang S, Fang S, Shi Z, Jiang J, Zhou X, Lin J, 2017. Direct Powder Forging of PM Nickel-based Superalloy: Densification and Recrystallisation, International Journal of Advanced Manufacturing Technology, 88: 2661-2670. http://dx.doi.org/10.1007/s00170-016-8966-9 http://hdl.handle.net/10044/1/33102

(13) Guan Y, Chen B, Zhou J, Britton TB, Jiang J, Dunne FPE, 2017. Crystal Plasticity Modelling and HR-DIC Measurement of Slip Activation and Strain Localisation in Single and Oligo-crystal Ni Alloys under Fatigue. International Journal of Plasticity, 88: 70–88. http://dx.doi.org/10.1016/j.ijplas.2016.10.001 http://hdl.handle.net/10044/1/41121


(1) Jiang J, Yang J, Zhang T, Zou J, Wang Y, Dunne FPE, Britton TB, 2016. Microstructurally sensitive crack nucleation around inclusions in powder metallurgy nickel-based superalloys, Acta Materialia, 117: 333-344. https://dx.doi.org/10.1016/j.actamat.2016.07.023 http://hdl.handle.net/10044/1/34901

(2) Peng Z, Tian G, Jiang J, Li M, Chen Y, Zou J, Dunne FPE, 2016. Mechanistic behaviour and modelling of creep in powder metallurgy FGH96 nickel superalloy. Materials Science and Engineering A, 676: 441-449. http://dx.doi.org/10.1016/j.msea.2016.08.101 http://hdl.handle.net/10044/1/42400

(3) Wang Y, Mohammed IK, Balint DS, 2016. Methodology for Modelling Diffusion Bonding in Powder Forging, Key Engineering Materials, 716: 817-823. http://dx.doi.org/10.4028/www.scientific.net/KEM.716.817

(4) Fang S, Shi Z, Bai Q, Jiang J, Wang S, Lin J, 2016. An Investigation of Direct Powder Forging of Nickel Superalloy FGH96, Key Engineering Materials, 716: 793-799. http://dx.doi.org/10.4028/www.scientific.net/KEM.716.793

(5) Del Linz P, Hooper PA, Arora H, Wang Y, Smith D, Blackman, BRK, Dear JP, 2016. Delamination properties of laminated glass windows subject to blast loading, International Journal of Impact Engineering. http://dx.doi.org/10.1016/j.ijimpeng.2016.05.015 http://hdl.handle.net/10044/1/32919

(6) Del Linz P, Wang Y, Hooper PA, Arora H, Smith D, Pascoe L, Cormie D, Blackman, BRK, Dear JP, 2016. Determining material response for Polyvinyl Butyral in Blast loading situations, Experimental Mechanics. http://dx.doi.org/10.1007/s11340-016-0179-5 http://hdl.handle.net/10044/1/33152

(7) Jiang J, Zhang T, Britton TB, Dunne FPE, 2016. Deformation Compatibility in a Single Crystalline Ni Superalloy, Proceedings of the Royal Society A. 472: 2185. http://dx.doi.org/10.1098/rspa.2015.0690 http://hdl.handle.net/10044/1/28345

(8) Britton TB, Jiang J, Guo Y, Vilalta-Clemente A, Wallis D, Hansen L, Winkelmann A, Wilkinson AJ, 2016. Tutorial: Crystal Orientations and EBSD – or which way is up?  Materials Characterization. http://dx.doi.org/10.1016/j.matchar.2016.04.008 http://hdl.handle.net/10044/1/31250


(1) Bai Q, Lin J, Tian G, Zou J, Dean TA, 2015. Review and analysis of powder prior boundary (PPB) formation in powder metallurgy processes for superalloys. Journal of Powder Metallurgy & Mining, 4: 127. http://dx.doi.org/10.4172/2168-9806.1000127 http://hdl.handle.net/10044/1/23517

(2) Lan B, Lowe MJS, Dunne FPE, 2015. A Generalised Spherical Harmonic Deconvolution to Obtain Cubic Texture from Ultrasonic Wave Speed. Journal of the Mechanics and Physics of Solids, 83: 221-242. https://dx.doi.org/10.1016/j.jmps.2015.06.012 http://hdl.handle.net/10044/1/24527

(3) Lan B, Lowe MJS, Dunne FPE, 2015. A Spherical Harmonic Approach to HCP Texture from Ultrasound: A Solution to the Inverse Problem. Journal of the Mechanics and Physics of Solids, 83: 179-198. https://dx.doi.org/10.1016/j.jmps.2015.06.014 http://hdl.handle.net/10044/1/24528

(4) Jiang J, Yang J, Zhang T, Dunne FPE, Britton TB, 2015, On the mechanistic basis of fatigue crack nucleation in Ni superalloy containing inclusions using high resolution electron backscatter diffraction, Acta Materialia, 97, 367-379. https://dx.doi.org/10.1016/j.actamat.2015.06.035 http://hdl.handle.net/10044/1/26580

(5) Tong V, Jiang J, Wilkinson AJ, Britton TB, 2015. The effect of pattern overlap on the accuracy of high resolution electron backscatter diffraction measurements, Ultramicroscopy, 155: 62-73. http://dx.doi.org/10.1016/j.ultramic.2015.04.019 http://hdl.handle.net/10044/1/33442


(1) Bai Q, Lin J, Jiang J, Dean TA, Zou J, Tian G, 2014. Study of direct forging process for powder superalloys. Materials Science and Engineering A,621: 68-75. http://dx.doi.org/10.1016/j.msea.2014.10.039 http://hdl.handle.net/10044/1/23517

(2) Bai Q, Lin J, Tian G, Balint DS, Zou J, 2014. A Novel Forming Process for Powder Metallurgy of Superalloys. Key Engineering Materials, 622-623: 833-839. http://dx.doi.org/10.4028/www.scientific.net/KEM.622-623.833

(3) Bai Q, Lin J, 2014. Application of finite element method in hot forming of titanium alloy aircraft engine blades, Journal of Aeronautical Materials, 34(4): 62-71. http://dx.doi.org/10.11868/j.issn.1005-5053.2014.4.006